Solar-Powered Hot Water – How to Use Even More Solar Energy in Your Own Home

The more self-generated solar energy you use in your own home, the more efficient your PV system becomes. When self-consumption is high, grid feed-in goes down. If you combine a battery-storage system with an electric heating element, you can use as much of your solar power as possible for yourself. Thanks to electric water heating, our colleague Manuel März enjoys hot water essentially at zero cost, which means that his heat pump even gets some time off in the summer month.

 

For März, installing a PV system with a storage system in spring 2014 was the first step toward independence from rising electricity costs and his electric utility company. He is an expert in solar energy and has spent 10 years at SMA, where his responsibilities include off-grid electricity supply solutions. This includes energy self-sufficient mountain cabins and power supply systems for remote islands. The focus is always on generating energy precisely where it is needed.

He consistently pursues this goal in his personal life as well. Since spring 2015, he and his wife Rebecca have been realizing his dream of using electricity produced entirely from solar power. In addition to the PV system and heat pump, their energy supply is now equipped with two AC ELWA-E heating elements from my-PV. These help reduce electricity procurement costs and minimize the heating and hot water bill. The heating elements work like an immersion heater, efficiently converting the excess solar power from the hot water and heating tanks into heat in a continuous, grid-compatible process.

1_verbraucherbilanz-032017_ac-elwa_en

242.05 KWh + 12.18 KWh was not fed into the utility grid, but was used at home instead.

Generating hot water electrically and saving costs

Heating and hot water appliances account for as much as 75% of a household’s energy needs. In Germany, the average daily consumption of drinking water is roughly 120 liters. Approximately a third of this is heated and generally referred to as hot water. On average, a typical home in Germany consumes 22 cubic meters of hot water per year at a cost of around €300. The cost of heating water varies considerably by the cubic meter and depending on the fuel used. However, if you heat your water with self-generated solar power instead, the costs are effectively zero.

2_verbraucherbilanz-08-04-2017_ac-elwa_en

The self-consumption quota is 99%. Otherwise, the energy from the AC-ELWA-E 006/008 would have entered the utility grid at €0.13 per KWh.

The März family chose an east–west arrangement for their PV system, which means that it can be used to generate solar power from sunrise to sunset. This type of arrangement is currently very popular because people are now looking to maximize self-consumption rather than simply yield the best possible feed-in tariff with a south-facing configuration. This is precisely the purpose of a heating element that uses surplus solar energy from the PV system to heat water. Since 2016, the couple have been partially heating their water using the AC ELWA-E with solar power from the 10 kilowatt peak system in an old building that they renovated themselves. Initial concerns that the water would not be available quickly enough or in sufficient quantities proved to be unfounded. The elements are controlled by the Sunny Home Manager, which intelligently manages the household and automatically activates the heating elements, always at the right power level, when excess solar power is available. Self-consumption is optimized every single day of the year in this order:

 

1. Supplying home appliances: major domestic appliances such as washing machines and dishwashers can be programmed to run on solar power.

2. Charging the battery: the battery provides solar energy for evening and night hours. Regular charge and discharge cycles extend the battery’s service life.

3. Activating the my-PV ELWA_006 heating element (summer) and generating hot water: the AC ELWA-E is activated when there is surplus energy and heats water for cooking, showering and washing hands.

4. Activating the my-PV ELWA_008 heating element (winter only) and generating hot water: the AC ELWA-E is supplied via solar energy and heats the water used to heat the house.

3_energiebilanz-032017_en

Intelligent energy management enables 96% of the energy generated to be used in the home. Last March, purchased electricity was reduced by 62% (self-sufficiency quota).

Protecting the heat pump and extending its service life

Although the ELWA has the lowest priority in the März household, it enables the air to water heat pump to be switched off entirely in the summer months. This extends the service life of the equipment—after all, if it’s not running, it can’t break down. The heating element itself is largely maintenance-free. Depending on the mineral content of the water, it may be advisable to use a filter cartridge to prevent the formation of limescale. This is because limescale, which forms deposits similar to those found in kettles, has an insulating effect and can hinder energy exchange by the heating element.

Cat Mohrchen also enjoys the cozy warmth of the hot-water ceiling heating.

Cat Mohrchen also enjoys the cozy warmth of the hot-water ceiling heating.

The renovated old building offers another special feature, which is that the house is heated using hot-water ceiling heating. This exceptionally energy-saving method of operation ideally complements the heat pump and enables a low flow temperature of 35°C, even in an old building. Mohrchen the cat is not the only one to enjoy the agreeable radiant heat—friends and relatives are also frequently pleasantly surprised. Another positive side effect of the space heating system is that there is no need for unsightly radiators, and dust bunnies are a thing of the past thanks to the absence of circulated air.

Incidentally, März doesn’t buy into the claim that the heat pump requires a longer start-up time and thus more energy to heat up when it is switched on again. Protecting the pump is his top priority. If a little more energy than usual is indeed needed, he doesn’t think it too much of a problem—after all, the energy comes from the PV system and doesn’t cost anything.

4_energiebilanz-25-03-2017_en

100% independence

heizstab

The water heater AC ELWA-E, rubber duck included 😉

Profile: the “solar heating system”

To boost self-consumption of their own solar power, the März family, from the town of Borken, added the my-PV AC ELWA-E heating element to their grid-connected storage system in spring 2016. The resulting hybrid storage system enables the self-generated solar power to be utilized in full. Only when all appliances have been supplied, the battery charged and the water electrically heated does the März family feed solar power into the utility grid.

The AC ELWA-E elements are incorporated via Ethernet into intelligent energy management with the Sunny Home Manager. They are infinitely variable from zero to three kilowatts and adjust their output every second

to the supply of electricity, and consume only 1.5 watts in standby mode.

The Sunny Home Manager manages the flow of energy such that self-consumption is covered first, then the battery is charged; the remaining solar power is used to heat the building and provide hot water. The buffer tank collects solar power from the roof in the form of thermal energy.

 

PV system: 10 kWp east–west arrangement, 62° roof pitch

Inverter: SMA Sunny Tripower STP8000TL-20, 3 x Sunny Island 4.4M-11 battery inverters

Battery: Exide SH48V16.0-B
Sealed lead-acid batteries with up to 3800 cycles at 50% DOD (depth of discharge)
Total capacity 330 Ah (equates to 16 KWh). Usable capacity: approximately 8 kWh

 

Controller: Sunny Home Manager, SMA Energy Meter, SMA Sunny Sensor Box

Heater: air to water heat pump for drinking and hot water; each drinking and hot water storage tank is fitted with an electric heater

Water heater: AC ELWA-E

This article was published in 2017. As we are constantly developing our solutions, there may be newer or additional options for the tips and techniques in this article.

9 Comments
  1. Millie Hue
    Millie Hue says:

    It’s interesting to know that the system will work like an immersion heater that efficiently converts excess solar power from the hot water and heating tanks into a continuous, grid-compatible process. I love how there would be a reuse of energy which means that there will be nothing wasted. That would definitely mean that we can save on electricity bills while not getting a lack of heating resources throughout the days.

    Reply
    • Christiane Keim
      Christiane Keim says:

      Hello Millie,

      Thanks for your kind feedback.
      Please note that we have to remove external links on our blog due to legal regulations.
      Thanks for your understanding and best wishes for 2022!

      Sunny regards
      Christiane

      Reply
  2. JD
    JD says:

    Hi, I’m interested in the ceiling heating system described as a ‘low flow 35C space heating’ system. Are there more details available on this style of heating?

    Reply
  3. Martin
    Martin says:

    I read this article with great interest. Finding a local company in the Netherlands that is familiar with solar panels AND with installing DC boilers is virtually impossible. I shall be having 11 solar panels with a total of 3795 Wp, plus a SMA 3.6TL inverter, installed in January and it would be great to be able to use a DC boiler element as indicated. But some DC boilers mention maximum 8 panels. Is there not a risk that on a sunny day the energy production exceeds the DC element’s 3KW and overloads it? What happens then? And what is the role of the Sunny Home Manager (which i have not ordered yet)?

    What I am also interested in, is a solution to the following. Here in Holland most houses are heated by a gas boiler, sometimes with a combined hot-water storage of 40-80L. This boiler has an indirect heating coil, fed from the gas central heating boiler. One can also buy an electrical boiler, but this is too expensive to run on the grid. So the best solution here will be a boiler with indirect coil for all-year round use AND a DC element working as a supplement when the sun shines. But try to find such a solution and an experienced local installer! Impossible.

    Reply
  4. John Male
    John Male says:

    Dear Anke,
    Am very much interested in sma hot water heating systems but I need a donation to achieve some training in Germany so that I can market these products in Africa particularly
    my country Uganda. Thanks very much.
    John Male.

    Reply
  5. John Barrow
    John Barrow says:

    I have a 3.920 kWh SUNNY BOY system. How can I find out more about the Sunny Home Manager.
    I would like to consider Battery Storage / Washing Machine usage / Hot water management
    We raise about 3600 kWh each year from our system
    Are there any local Suppliers, or Experts I can speak to ?
    Our address is BD11 2JE in Bradford, UK
    Many thanks
    John Barrow

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>