Service Tip: When Do I Need PIC and RID for the Sunny Portal?

Via our comments function, we frequently receive questions about registering in Sunny Portal and entering the product identification code (PIC) and the registration identifier (RID).

 

Important: The PIC and RID are required only if you own a system with Webconnect technology or with a Sunny Home Manager. You can find out how to register your system in Sunny Portal in this post. If you have another communication product, such as a Sunny WebBox or a Cluster Controller, you will not be required to enter a PIC or RID. With the Sunny WebBox and the SMA Cluster Controller, you can register the devices in Sunny Portal directly via the web interface. Further information can be found in the user manual.

 

Using the Sunny Portal app

Some customers have told us that they cannot get the Sunny Portal app to work and have requested a password to use it. Please note: To be able to use the Sunny Portal app, the system must already be registered in the Sunny Portal. You can then use the same login details for the app. Further information about the app can be found here.

 

Tags: ,

This article was published in 2015. As we are constantly developing our solutions, there may be newer or additional options for the tips and techniques in this article.

39 Comments
  1. Balbir
    Balbir says:

    Hi
    I got sunny boy SB 5000TL-21. The display screen shows Varistor defective.
    Is it fault in the inverter?
    Thanks

    Reply
  2. Darryl Luchterhand
    Darryl Luchterhand says:

    Hi I have a Sunny Boy SB 5000TL-21 can I get web connect as I can’t find a PIC or RID number?

    Reply
  3. Hans Jaspers
    Hans Jaspers says:

    Hi, I have 2 sunny boy 5.0 connected to home manager 2.0
    besides the 2 5.0’s I also have an SB 5000 TL – 21 which I just got updated to the latest software version.
    My installer informed me that with the latest update, this inverter was to be found in home manager, but unfortunately this is not the case. I tried to add the system in sunny portal but I don’t have a PIC and a RID. in the portal its mentioned that the serial number and registration ID would also be ok to add the device, but I don’t know where to find the Registration ID, can you help me with that please?

    Thanks,
    Hans

    Reply
  4. Nick Rhodes
    Nick Rhodes says:

    Hi Carolyn, my SB3000HF-30 does not have a PIC or RID on the label. I assumed it wasn’t possible to use the portal. If it is, where can I find out, as the installation company no longer exists.

    Reply
  5. Nick Rhodes
    Nick Rhodes says:

    Hi,
    I currently query by SB3000HF-30 with a Sunny Beam bluetooth monitor. I was expecting to be able to access the inverter by bluetooth on my phone but I can’t see a way to do it. Is it in fact technically possible?

    Best regards,
    Nick

    Reply
    • Carolyn Schlosser
      Carolyn Schlosser says:

      Hi Nick,

      If you want to monitor your system via your mobile phone you can use our Sunny Portal.

      Sunny regards,
      Carolyn

      Reply
  6. M Arafat Ali
    M Arafat Ali says:

    I have a Solar Plant SMA Inverter Manager Model:IM-20. Can I register it in sunny portal? Where can I found PIC & RID?

    Reply
  7. rakesh
    rakesh says:

    MAM
    i have no idea how to know PIC and RID number so please help me and how to get deta from inverter in laptop ?????? please help me without PIC AND RID

    Reply
  8. Asim Aslam
    Asim Aslam says:

    Hello
    Unfortunately I have lost PIC and RID number, how can I retrive it? Kindly reply…
    Regards
    Asim Aslam

    Reply
  9. Harvey Braswell
    Harvey Braswell says:

    The link to the online service center doesn’t let anyone with a system in the USA register. There is no dropdown for America, United States of America, or USA. How do I register for support?

    Reply
  10. Alan Leu
    Alan Leu says:

    Hi Carolyn, my Sunny Boy 3800 has a 485i module which is connected to a Locus LGate 120 meter. Unfortunately my installer has gone bankrupt. Is it possible to register my system to the SMA portal so I can do monitoring?

    THanks for your help.

    Reply
  11. ruud geerts
    ruud geerts says:

    Hello, i have a SB4.0 and he indicates that webconnect is “ok”.
    But when go to the sunnyportal and fill in the correct PIC and RID he can’t find the device.
    What can it be?

    Gr. Ruud

    Reply
    • Carolyn Schlosser
      Carolyn Schlosser says:

      Hi,

      It is not possible to do a remote diagnosis. Please contact an IT expert or your installer for help.

      Sunny regards,
      Carolyn

      Reply
  12. ricardo hernandez
    ricardo hernandez says:

    i have a inverter manager hoked to 16 stp 60 inverters
    but when i wanto to set upo a sunny portal for this system ask for a PIC and a Rid
    and there is no information about it can knows wher can i get this

    Reply
  13. Fernando
    Fernando says:

    Hello,

    I have a SMA INVERTER MANAGER IM-10 from Brazil that I’m trying to add to the sunny portal. The label doesn’t have the PIC or RID on it. Is there another way to determine this information?

    Thanks,

    Fernando.

    Reply
  14. Steve GS
    Steve GS says:

    I have an SB 1700 inverter and a Sunny Beam reader (firmware version 1.00.7.R). I have about 5 years worth of data (system installed in UK at latitude 52 deg N 2.5 deg W in February 2012). Is there any way I can register my system with you and upload the CSV data from the Sunny Beam? I do not want the system to be connected to the web, but I’m prepared to update this information periodically. Thank you.

    Reply
  15. Stéphane
    Stéphane says:

    Hello,

    i have a Sunny Boy 3000 and i don’t find the pic and rid codes,
    However i have a com card with a com bounds, the Eeprom firmware is : “SBGR BFR2,8 SRR 2.8”
    Could you tell me if is possible to me to have webconnect ?

    Best regards Stéphane

    Reply
    • Carolin Rost
      Carolin Rost says:

      Hello Stéphane,
      Unfortunately, this inverter doesn’t have WebConnect and therefore doesn’t have a PIC and RID number too. We can also offer no retrofit kit for this device.
      Kind Regards, Carolin

      Reply
  16. Adam Lewis
    Adam Lewis says:

    Hello,

    I have a SI 3.0M-11 from Germany that I’m trying to add to my sunny portal. The label doesn’t have the PIC or RID on it. Is there another way to determine this information?

    Thanks,

    Adam

    Reply
    • Viktoria Mai
      Viktoria Mai says:

      Hello Adam,

      the SI has no PIC and RID. Therefore it is not possible to add the SI in a webconnect system in the portal. You need depending on whether you have an OnGird or OffGird system a Homemanger or a ClusterController. Please turn to your installer who will be able to advise you about your installation.

      Kind regards,
      Viktoria

      Reply
      • simon Wilkinson
        simon Wilkinson says:

        Hi I have the SB4000tl-20 inverter fitted in 2010 and still working very well. My label has no PIC or RID as i am trying to get the unit on line. Is this inverter a type that can be put onto the net i wonder. Are you able to send update links for the software and connection instructions. Many thanks Simon

      • SMA Solar
        SMA Solar says:

        Hello Simon,
        without a serial number it’s hard to tell, if a webconnect modul is installed. It’s best to contact our colleagues via Online Service Center at my.sma-service.com/s/onlineservicecenter?language=en_US

        Sunny regards!

  17. Patrick Besso
    Patrick Besso says:

    Hi Sarah
    Sorry to bother you, but just a quick question. My display panel’s backlight is on all the time, which I don’t want. How can I turn it off? My neighbour, who had his put in at the same time as me, has his off, which is how I know that on is not the default setting.
    Unfortunately, I can’t use Sunny Explorer with my Android or IOS devices, maybe that’s the problem?

    Thank you

    Patrick

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>