Service Tip: Short-Term Solution for Logging into Sunny Design

From on September 22, 2014 in Category Service with 11 Comments
Sunny Design

Since the last update of Sunny Design (version 3.2), some of our customers have not been able to log into Sunny Design via the Windows desktop application using their e-mail address and password. The following error message appears:

Error message in Sunny Design

Error message in Sunny Design

In response to a customer request, in the meantime we would like to offer our other customers a short-term solution for logging into Sunny Design via the desktop version. We are of course working to find an adequate long-term solution to the problem as soon as possible.

 

Short-term solution: Login via Sunny Design Web

Before logging into Sunny Design via your desktop, access the web version of Sunny Design with your browser by going to the following URL: www.sunnydesignweb.com. Enter your login details for access and then log out again. After that, login via the desktop version. Then it should work.

Note: If you are using Sunny Design for the first time, it is also necessary to log into the web version before logging into the desktop version.

 

5.00 avg. rating (97% score) - 2 votes

The Author

avatar

My tasks:
Creative mind in Service Marketing. Brochures, customer correspondence, and web texts come from my desk.
My topics:
SMA service topics. For example insights into SMA customer service and service product management or tips for your daily work.
And I’m interested in hearing your opinion. What services can we offer you to provide you with even better support?
What even my colleagues don’t know about me:
I was the school high jump champion at a height of just 1.60 meters (5’2”).

Tags

Related Posts

11 Comments

  • avatar

    David Bartley

    December 15, 2015 at 21:03

    Hi SMA. I’ve used Sunny Web Design to design a system and have found that it may be giving incorrect results. Using a STP7000TL, Sunny Web Design says that this range of inverters has a MPPT range of 150 to 800V, allowing the use of as few as 6 x 60cell panels in a string. I am currently installing the system near Sydney Australia which has 2 strings of 10 panels in series, the panels are 260W Jinko poly 60 cell panels. I got green ticks and a good specific energy result of 1545KWH/KWP from Sunny Web Design but now believe the results are incorrect. Can you confirm if 10 of these panels in series is too few for this inverter or am I worrying unnecessarily? I need to make a decision quickly if I need to add more panels or use a smaller inverter, either way will be a big hassle so I’m hoping the system will work ok as it is.
    Thankyou, David Bartley, Copacabana Australia.

    Reply »
    • avatar

      Julia Stunz

      December 16, 2015 at 09:03

      Hi David,
      to answer your questions the best way is to contact the Service Line from SMA Australia.
      The only advice that we can give right now is to compare the module datasheet and the characteristic with the values at Sunny Design.

      Best regards,
      Julia

      Reply »
  • avatar

    Andile

    February 19, 2015 at 12:17

    Hi Sarah
    I have been using Sunny Design 3 for a proposed project but today I find that I am unable to login, it keeps saying “Login Failed”. However, I am able to login to Sunny Design Web using the same login details that is being rejected by Design 3. I saw your short term solution tip and I logged into design web and then after I restarted and logged into design 3 but i still cannot log in. Unfortunately I have not synchronised the 2 systems for some time and have done a lot of work on Design 3 and I am now stuck and cannot continue. Do you have a solution for me?

    Reply »
    • avatar

      Sarah Römsch

      February 20, 2015 at 08:57

      Hi Andile,
      I asked our service specialists and we need more details in order to help you.
      Please call my colleagues at +49 561 9522-2499. We will find a solution.

      Have a nice weekend

      Sarah

      Reply »
  • avatar

    Stephanie

    January 29, 2015 at 05:58

    I have my Sunnyboy inverter installed yesterday, downloaded the app on iphone and where can I get log in details ?

    Reply »
    • avatar

      Sarah Römsch

      January 30, 2015 at 14:13

      Hi Stephanie,

      to be able to send data to the Sunny Portal and therefore to use the Sunny Portal App, a data logger such as a Sunny Home Manager or a Sunny WebBox is required. After the registration at http://www.SunnyPortal.com, you will be able to use the App with your Sunny Portal login data.

      Please note that there is no possibility to use the Sunny Portal or the Sunny Portal App without a registered plant at Sunny Portal.

      Have a nice weekend.
      Best regards,
      Sarah

      Reply »
  • avatar

    Tri Ly

    January 12, 2015 at 04:42

    Please response ASAP

    Reply »
  • avatar

    tri ly

    January 12, 2015 at 04:40

    We have a 15 KW PV system installed on May 2013. Now the red LED is ON the message read” Interference devise” restart in 130 S code 6438. Please advise, the company sold this system to us is disappeared.
    We are in Perth WA. Address 3/61 walters Dr Osborne pk. 6017.
    Inverter Sunny tripower model 17000TL
    Thank you.

    Reply »
    • avatar

      Leonie Blume

      January 20, 2015 at 11:59

      Hey,
      My Australian colleagues will get back to you via email.
      Best regards
      Leonie

      Reply »
  • avatar

    mpho baki

    October 31, 2014 at 13:36

    kindly quote me on the compact meteo station

    Reply »
  • avatar

    mpho baki

    October 31, 2014 at 13:28

    kindly give a quotation on the compact meteo station

    applications of the meteo station and technical data will be scanned to you after your reply

    Reply »

leave comment

 Maximum comment length